Please Don't Honk At Me I'll Cry

• Permanent Vinyl Decal

• Alcohol Prep Pad

1. Clean the Surface – Wipe the area with the included alcohol wipe or glass cleaner and dry completely.
    

2. Prep the Decal – Firmly rub the clear transfer tape side with a card or squeegee.
    

3. Peel Backing – Slowly remove the white paper backing, ensuring the decal stays on the transfer tape side.
    

4. Position – Carefully align the decal where desired; once it sticks, it can’t be moved.
    

5. Apply – Place one side of the decal down onto area and use card to rub from the center outward to remove air bubbles. Slowly place other side down and repeat.
    

6. Remove Tape – Slowly peel off the transfer tape at a sharp angle, pressing back down if vinyl lifts.
    

7. Set – Let the decal sit for 24 hours to fully adhere.

*These decals are not recommended for surfaces where adhesive may cause damage such as walls, car bodies or other painted surfaces.*

• Not recommended for delicate or easily damaged surfaces

• Once applied, decals cannot be removed or reapplied

• Colors may vary slightly from photos due to monitor differences and lighting. 

• Designs with finer details or thinner lines may be more delicate and could show signs of wear sooner than thicker lined designs.